| 004-62230-58 |
Gas Regulator, CGA 580 |
30 psig; Compatible with Ar, He, Kr, and N2 |
| 004-62230-32 |
Gas Regulator, CGA 320 |
30 psig; Compatible with CO2 |
| 004-33601-00 |
Expansion Kit |
Adds additional outlet to gas regulator. Includes fittings and instructions |
| 004-33602-00 |
Pressure Relief Kit |
Prevents excessive gas pressure in event of regulator failure. Not to be used with noxious gas. |
| 004-25549-00 |
Gas Line Reducer |
1/8 in. (0.32 cm) x 1/4 (0.64 cm) in. tube for gas lines |
| 201-25818-01 |
Stainless Steel Gas Inlet Line |
5m (16 ft.) |
| 290-25846-01 |
Copper Gas Inlet Line |
5m (16 ft.) |
| 290-25846-00 |
Copper Gas Inlet Line |
6 ft. |
| 062-00000-11 |
110/120V Vaccum Pump |
with built-in anti-suckback valve; Includes vacuum hose, fittings, exhaust filter, oil and manual |
| 062-00000-23 |
220/240V Vaccum Pump |
with built-in anti-suckback valve; Includes vacuum hose, fittings, exhaust filter, oil and manual |
| 062-00004-00 |
Hybrid Turbo Vacuum Pump |
assembly for Krypton units only |
| 004-16003-01 |
Vacuum Pump Oil |
1 Liter; for vacuum pump |
| 004-27040-00 |
Exhaust Filter |
For vacuum pump exhaust |
| 062-33002-00 |
Oil Vapor Trap |
For vacuum pump |
| 004-16830-00 |
Activated Alumina Pellets |
500g; for oil vapor trap |
| 021-00000-00 |
Liquid Nitrogen Transfer System |
Model 021 LN2 transfer system, for easy filling of sample Dewars; includes 47-L dewar, mobile platform, and pump with 100-cm discharge line |
| 303-25825-00 |
Glass Dewar |
2.75 Liters |
| 004-34891-00 |
Stainless Steel Dewar |
4.0 Liters |
| 240-25901-00 |
Dip Stick |
for checking liquid nitrogen level in Dewar |
| 300-31802-02 |
Dewar Cover |
for 3/8-in. Tube; used during analysis to lenghten the lifetime of a dewar |
| 300-31802-03 |
Dewar Cover |
for 1/2-in. Tube; used during analysis to lenghten the lifetime of a dewar |
| 240-25895-00 |
Dewar Insulator |
used when dewar is not in use |
| 025-00303-00 |
Chiller Dewar |
Micromeritics’ Chiller Dewar is a closed loop recirculating system that utilizes a high surface area copper coil to provide excellent heat transfer between the dewar and the recirculating liquids. Temperature control is provided through Fan external recirculating bath or chiller bath which are supplied as accessory items. The Chiller Dewar is easily mounted to the system’s elevator using the supplied clamping screw and bar set. The unit comes complete with all necessary fittings and tubing for connection to the recirculating bath. An external RTD is also provided which mounts inside the dewar. The RTD connects to the recirculating bath and ensures that precise temperature control is maintained over the course of the experiment |
| 205-33005-00 |
Iso Controller |
Micromeritics’ ISO Controller utilizes thermoelectric cooling based on the Peltier principle. The unit is designed to maintain a constant temperature between 0 °C and 80 °C when using CO2, N2, and other gases for adsorption analysis. The device rapidly cools and efficiently maintains temperature with minimal electrical current required. The sample area will accommodate up to 3 sample tubes. Heat removal is uniform and accurate when the unit is used with an appropriate liquid (ambient water or liquid antifreeze). The dewar section is placed on the instrument dewar elevator and then raised into position for analysis. |
| 302-61001-00 |
1/4 in. OD Tristar Sample Tube |
for analyzing powdered samples where free space management (with a filler rod inserted) is critical |
| 302-61001-01 |
3/8 in. OD Tristar Sample Tube |
for analyzing any type of sample |
| 302-61001-02 |
1/2 in. OD Tristar Sample Tube |
for analyzing larger pieces of granular or pelleted samples |
| 302-61002-00 |
1/4 in OD Flat Bottom Sample Tube |
|
| 302-61002-01 |
3/8 in OD Flat Bottom Sample Tube |
|
| 302-61002-02 |
1/2 in OD Flat Bottom Sample Tube |
|
| 302-33602-00 |
3/8 in. Sample Tube Kit |
includes six each sample tubes, O-rings and stoppers; three each isothermal jackets, filler rods, and ferrules; one sample tube brush; and a Dewar cover |
| 302-33603-00 |
1/2 in. Sample Tube Kit |
includes six each sample tubes, O-rings and stoppers; three each isothermal jackets, filler rods, and ferrules; one sample tube brush; and a Dewar cover |
| 302-33601-00 |
1/4 in. Sample Tube Kit |
includes six each sample tubes, O-rings and stoppers; three each isothermal jackets, filler rods, and ferrules; one sample tube brush; and a Dewar cover |
| 302-33604-00 |
1/4 in. Flat Bottom Sample Tube Kit |
includes six each sample tubes, O-rings and stoppers; three each isothermal jackets, filler rods, and ferrules; one sample tube brush; and a Dewar cove |
| 302-33605-00 |
3/8 in. Flat Bottom Sample Tube Kit |
includes six each sample tubes, O-rings and stoppers; three each isothermal jackets, filler rods, and ferrules; one sample tube brush; and a Dewar cove |
| 302-33606-00 |
1/2 in. Flat Bottom Sample Tube Kit |
includes six each sample tubes, O-rings and stoppers; three each isothermal jackets, filler rods, and ferrules; one sample tube brush; and a Dewar cove |
| 004-32004-00 |
Rubber Stopper for Sample Tube |
For 1/2 in. and 3/8 in sample tubes |
| 004-32604-08 |
Plastic Cap for Sample Tube |
For 1/4 in. sample tubes |
| 240-25853-00 |
Sample Tube Funnel |
For filling sample tubes |
| 300-25825-00 |
Sample Tube Ferrule |
For 1/4 in. sample tube |
| 300-25826-00 |
Sample Tube Ferrule |
For 3/8 in. sample tube |
| 260-25843-00 |
Sample Tube Ferrule |
For 1/2 in. sample tube |
| 240-14855-00 |
Sample Tube Rack |
For supporting sample tubes |
| 300-32800-00 |
Weighing Support |
For supporting samples while weighing |
| 004-25466-00 |
Duro Buna-N O-Ring Size 10 |
for 1.4-in. (0.64-cm) sample tube |
| 004-25022-00 |
Duro Buna-N O-Ring Size 12 |
for 3/8 in. (0.96-cm) OD sample tube |
| 004-25469-00 |
Duro Buna-N O-Ring Size 14 |
for 1/2-in. (1.27-cm) OD sample tube |
| 302-25822-00 |
1/4 in. Isothermal Jacket |
|
| 302-25822-01 |
3/8 in. Isothermal Jacket |
|
| 302-25822-02 |
1/2 in.Isothermal Jacket |
|
| 302-25821-00 |
1/4 in. Hanging Filler Rod |
|
| 302-25821-02 |
1/2 in. Hanging Filler Rod |
|
| 302-25821-01 |
3/8 in. Hanging Filler Rod |
|
| 004-54609-00 |
Brush, Tube Cleaning |
For cleaning 1/2 in. sample tubes |
| 004-54104-00 |
Brush, Tube Cleaning |
For cleaning 3/8-in. sample tubes |
| 004-16821-00 |
Silican-Alumina Reference Material |
SA, approximately 198 m²/g |
| 004-16833-00 |
Carbon Black Reference Material |
SA, approximately 24.1 m²/g |
| 004-16816-00 |
Alumina Reference Material |
SA, approximately 0.25 m²/g; for krypton analysis |
| 004-16858-00 |
Alumina Reference Material |
SA, approximately 5.2 m²/g |
| 003-22617-00 |
Solenoid Manifold Valve with 0.025 Orifice |
for valves 1 through 10 |
| 003-22626-00 |
Solenoid Manifold Valve with 0.060 Orifice |
for valves 11 through 13 |
| 004-27046-00 |
40 micron Sample Port Frit |
|
| 004-54618-00 |
Sample Port O-ring Removal Tool |
removes sample port O-ring. |
| 260-25873-00 |
Sample Port Plug |
12mm dia x 25 mm; glass shell vial |
| 004-25630-00 |
Centering Ring, NW 16 |
Standard |
| 004-25491-02 |
Centering Ring, NW 40 |
Buna-N, AL for Pump, Vacuum, Hybrid Turbo |
| 302-33607-00 |
Seal Frit Kit |
includes three seal frits, nine openers, three filler rods, installation tool and instructions. |
| 302-33600-00 |
Operating Supplies with 3/8 in. Tubes |
|
| 302-33608-00 |
Krypton Upgrade Kit |
|
| 008-42001-00 |
Analytical Methods in Fine Particle Technology by: Paul A. Webb and Dr. Clyde Orr |
This book has been prepared to serve those just entering this field of technology as well as experienced researchers seeking insight into particular problems and guidance in achieving the utmost from their testing and research. |
| 200-42901-00 |
Gas Adsorption Theory Poster |
24'' X 36'' |
| 200-42902-00 |
Gas Adsorption Apparatus Poster |
24'' X 36'' |
| 202-33027-00 |
MicroActive Interactive Data Analysis Software V5.02 |
Micromeritics’ innovative MicroActive software allows users to interactively evaluate isotherm data from Micromeritics ASAP, TriStar, and Gemini gas adsorption instruments. Users can easily include or exclude data, fitting the desired range of experimentally acquired data points using interactive, movable calculation bars. Isotherms can be viewed on either a linear or logarithmic scale and available to the user under each calculation model. No need to generate reports to review results – now see it graphically and interactively on screen. |
| 003-63801-00 |
Ethernet Cable |
|
| 067-00000-00 |
Smart VacPrep without Vacuum Pump |
Smart VacPrep is an advanced six-port system that utilizes vacuum to prepare samples by heating and evacuation. Each of the ports may be operated independently. Samples may be added or removed from degas ports without disturbing the treatment of other samples undergoing preparation. Degassing automatically terminates when the samples have completed all programmed steps. |
| 067-00000-11 |
Smart VacPrep with 110V Vacuum Pump |
| 067-00000-22 |
Smart VacPrep with 230V Vacuum Pump |
| 067-00001-00 |
Smart VacPrep with High-Vacuum |
|
| 061-00023-00 |
VacPrep 061 |
Degasses up to six samples at up to 400°C with either flowing gas or evacuation (evacuation requires a vacuum pump and gas regulator). |
| 060-00023-00 |
FlowPrep 060 |
Degasses up to six samples at up to 400°C with flowing gas (requires a gas regulator) |