Records

Displays a list of all analysis reports from completed analyses.

Multiple checkboxes can be selected.
Columns are sortable by tapping the column header.
The analysis report is displayed by tapping the record.

Records Fields and Buttons Table

Field or Button

Description

Density (cm³/g)

Density of the sample.

Name

Description of the analysis.

Method

Displays the Envelope Density Report

Analysis Date

The date and time the analysis was run.

Std./ dev. (cm³/g)

Calculated using the points and slope data. A standard deviation should be less than 1.0.

Toolbar

	Deletes the selected file from the list.
	Opens the Control Chart report for the selected record.
	Downloads the selected record(s) as a ZIP file (file format is GeoPyc YYYY-MM-DD.zip where YYYY-MM-DD is the download date) to a USB device. If using a remote browser, a directory selector is opened for exporting the selected record(s) in a ZIP file.
	Select and upload a single record as an XML file or multiple records in a ZIP file. After uploading, a popup window displays the number of records added and the number of records rejected.
	Runs the selected record.
	Modifies the selected record. Tap UPDATE to save the changes.

Refer to the Field Display Summary table for information on which fields are available for each analysis type. Fields not listed on the table indicate the field is applicable to all analysis types.

Field Display Summary
	Envelope Density	Envelope Blank	Volume Calibration	Bulk Density	Bulk Blank
Sample mass	ü			ü
Absolute density	ü
Chamber+medium mass	1	ü
Preparation cycles	R/O	R/O	R/O	2	R/O
Measurement cycles	R/O	R/O	R/O	R/O	R/O
Consolidation unit	ü	ü	ü	ü	ü
Consolidation force	R/O	R/O	R/O	2	R/O
Conversion factor	ü			ü
Zero depth	ü		ü
Chamber diameter	ü	ü	ü	ü	ü

Legend
R/O	Indicates the field displays but cannot be edited in the Records view
1	Displays if Run Blank was not enabled in the SOP
2	Displays if Run Blank was enabled in the SOP
ü	Indicates the field displays

Return to Home