A unique dip-in wet sample dispersion unit that can be used with standard laboratory glassware. Suitable for a wide variety of dispersant volumes and particle size ranges.
| Pump speed range | 0-3500 rpm †† |
|---|---|
| Pump speed accuracy | +/- 50 rpm |
| Pump speed resolution | +/- 10 rpm |
| Maximum flow rate | 1.7 l/min. †† |
| Sonication power & frequency | 40W max, 40kHz (nominal) †† |
| Maximum volume | 250mL / 600mL / 1000mL (using lab beaker) |
| Materials in contact with the dispersant, additives and sample | 316 stainless Borosilicate Glass Tygon® R-3603. ††† Viton (cell seal only - perfluoroelastomer upgrade available) PTFE PEEK Titanium Nitride |
| Maximum particle size | 2100 µm † |
| Minimum time between measurements | Less than 60 seconds † |
| Dimensions (W, D, H) | 150mm x 220mm x 300mm |
| Weight | 4kg |
| Power | Standby Mode: 5W Nominal during operation: 80W Maximum: 96W |
| † | Sample dependent |
| †† | Dispersant dependent |
| ††† | Other tubing grades available on request |
Request a quote or talk to an expert for more information
