| Part Number | Description | Notes | | 004-62230-58 | Gas Regulator, CGA 580 | 30 psig; Compatible with Ar, He, Kr, and N2 |
| 004-33601-00 | Expansion Kit | Adds additional outlet to gas regulator. Includes fittings and instructions |
| 004-33602-00 | Pressure Relief Kit | Prevents excessive gas pressure in event of regulator failure. Not to be used with noxious gas. |
| 201-25818-01 | Stainless Steel Gas Inlet Line | 5m (16 ft.) |
| 290-25846-01 | Copper Gas Inlet Line | 5m (16 ft.) |
| 290-25846-00 | Copper Gas Inlet Line | 6 ft. |
| 236-61702-00 | Gemini 3/4 in OD Bulb Sample Tube | 3/4-in. (19.1-mm) OD bulb x 6.1-in. (155-mm) long, approx. 9 cm³ sample capacity |
| 238-61703-00 | Gemini 3/8 in OD Straight-Wall Long Sample Tube | 3/8-in. (9.6-mm) OD x 8.0-in.(203-mm) long, approx 2 cm³ sample capacity |
| 236-61707-01 | Gemini 5/8 in OD Straight-Wall Sample Tube | 5/8-in. (16-mm) OD x 0.53-in. (13.5-mm) ID x 6-in. (152 mm) long |
| 236-61703-00 | Gemini 3/8 in OD Straight-Wall Sample Tube | 3/8-in. (9.6-mm) OD x 6.1-in. (155-mm) |
| 239-33010-00 | Gemini 0.5395 in (16mm) Sample Tube Kit | 0.5395 in (16mm) sample tube kit consisting of: 2 sample tubes with stoppers, 16 OD., 2 hanging filler rods, 2 connectors with hooks attached, two connector nuts, 2 O-rings, 2 ferrules, 1 open end wrench, Left and right Dewar covers, modified |
| 236-61704-00 | Filler Rod for Balace and Sample Tube | 7mm X 146.1mm |
| 236-61705-00 | Filler Rod for Sample Tube | 7mm X 101.6 mm |
| 236-61708-00 | Hanging Filler Rod | 13 mm OD |
| 236-61706-00 | Hanging Filler Rod | 7 mm OD |
| 236-61709-00 | Hanging Filler Rod | 25.4 mm OD |
| 280-32800-00 | Sample Tube Weighing Support | For supporting sample tubes while weighing |
| 240-25853-00 | Powder Funnel | Nylon |
| 240-14855-00 | Sample Tube Rack | For holding sample tubes |
| 004-54611-00 | Cleaning Brush for Straight Wall Sample Tube | Brush, 8mm DIA X 50mm X 190mm LG. |
| 004-54612-00 | Cleaning Brush for Bulb Sample Tube | Brush, 25mm DIA X 25mm X 240mm LG. |
| 004-32004-00 | Rubber Stopper for Sample Tube | Help prevent sample contamination in atmosphere |
| 004-61065-00 | 3 mm Glass Beads | 90 grams; for displacing volume in the balance tube equivalent to the volume of sample in the sample tube when analysing high volume, low surface area samples. |
| 004-25022-00 | Duro Buna-N O-Ring Size 12 | for sealing 3/8 in. OD sample tube stem |
| 004-25466-00 | Duro Buna-N O-Ring Size 10 | for sealing filter disk |
| 004-27046-00 | Sample Tube Port Frit | 40 microns; 1/4'' D X 1/16 '' tall |
| 004-27024-00 | Balance Tube Port Frit | 2 microns; 1/4 '' D X 1/16 '' tall |
| 004-61064-00 | 600 mL Dewar | for Gemini VII 2390a,VII 2390p |
| 239-33601-00 | 2.2 L Stainless Steel Dewar Kit | includes dewar cover; for Gemini VII 2390a, 2390p |
| 239-33602-00 | 4.0 L Stainless Steel Dewar Kit | includes dewar cover; for Gemini VII 2390t |
| 239-31802-00 | Insulating Dewar Cover for 2.75L Dewar | |
| 236-31802-01 | Cover, Dewar Right | Active 32 |
| 236-31802-02 | Cover, Dewar Left | Active 33 |
| 062-00000-11 | 110/120V Vaccum Pump | with built-in anti-suckback valve; Includes vacuum hose, fittings, exhaust filter, oil and manual |
| 062-00000-23 | 220/240V Vaccum Pump | with built-in anti-suckback valve; Includes vacuum hose, fittings, exhaust filter, oil and manual |
| 004-16003-01 | 1L Vaccum Pump Oil | for vaccum pump |
| 200-25879-00 | Funnel for Vaccum Pump Oil | for vaccum pump |
| 004-27040-00 | Vacuum Pump Exhaust Filter | for vaccum pump |
| 062-33002-00 | Oil Vapor Trap | for vaccum pump |
| 004-16830-00 | Activated Alumina Pellets | 500g; for oil vapor trap |
| 236-42701-01 | French Keypad Template | |
| 236-42701-02 | German Keypad Template | |
| 236-42701-03 | Spanish Keypad Template | |
| 236-42701-04 | Italian Keypad Template | |
| 003-5113-00 | Slow-Blow Fuse | 3AG, 1.5A |
| 065-25811-00 | Isothermal Inserts for Gemini Bulb Tube | |
| 065-25812-00 | Isothermal Inserts for Gemini Straight Wall Tube | |
| 061-33001-00 | Flow Control Valve Kit | regulates gas flow and/or vacuum on sample preparation units; includes six flow control valves and instructions. |
| 239-33005-00 | Gemini VII Prep Seal Kit | used to degas and transfer air-sensitive samples to an analysis port without contamination. |
| 008-42001-00 | Analytical Methods in Fine Particle Technology by Paul A. Webb and Dr. Clyde Orr | This book has been prepared to serve those just entering this field of technology as well as experienced researchers seeking insight into particular problems and guidance in achieving the utmost from their testing and research. |
| 200-42901-00 | Gas Adsorption Theory Poster | 24'' X 36'' |
| 200-42902-00 | Gas Adsorption Apparatus Poster | 24'' X 36'' |
| 239-42802-00 | Gemini VII Operators Manual | Gemini 2390, V1.04 |
| 061-00023-00 | VacPrep 061 | Degasses up to six samples at up to 400°C with either flowing gas or evacuation (evacuation requires a vacuum pump and gas regulator). |
| 060-00023-00 | FlowPrep 060 | Degasses up to six samples at up to 400°C with flowing gas (requires a gas regulator) |
| 202-33027-00 | MicroActive Interactive Data Analysis Software V5.02 | Micromeritics’ innovative MicroActive software allows users to interactively evaluate isotherm data from Micromeritics ASAP, TriStar, and Gemini gas adsorption instruments. Users can easily include or exclude data, fitting the desired range of experimentally acquired data points using interactive, movable calculation bars. Isotherms can be viewed on either a linear or logarithmic scale and available to the user under each calculation model. No need to generate reports to review results – now see it graphically and interactively on screen. |
| 025-00239-00 | Chiller Dewar for Gemini 2390t | A closed plumbing system that circulates fluid from a temperature controlled bath into a small dewar filled with antifreeze in which the sample tubes are immersed |
| 004-16833-00 | Carbon Black Reference Material | SA, approximately 30.6 m²/g |
| 004-16858-00 | Alumina Reference Material | SA, approximately 5.2 m²/g |
